DRY MOP:

The more economical option to the Dry Superior Mop Pad. The Dry Mop Pad is made of 100% polyester.   Employing static electricity, the mop attracts dust, dirt, pet hair, crumbs and micro particles like a silent vacuum cleaner. Always use the dry mop before using the wet mop.

• Use on floors, ceilings and walls, ceiling fans and high windows.
• Extensive use of the dry mop will preserve your hardwood and tile floors.
• It reduces wear and tear on waxed surfaces as well.

• Attach the Dry Dusting Head to the aluminum base.
• Adjust the handle to the correct height (your nose) and lock by twisting the outer handle clockwise.
• Start by dusting the edges from the furthest point in the room back toward the exit or door, then  move the dust mop in a figure 8 pattern keeping the leading edge of the mop forward at all times. This will keep all the dust collected on the same side of the dust mop.
• When you have finished, use the Rubber Brush to brush the collected dust and hair out of the mop directly into the garbage can.
• Use a damp Antibac Envirocloth to pick up the debris, no longer needing a dust pan.

• Brush mop head using the Rubber Brush to remove hair and lint and rinse prior to the washing cycle
• Soiled dry mop can be pretreated with Carpet Stain Buster before laundering.
• Laundered with quality laundry powder or liquid in cold, warm, or hot water. Periodically it is a good idea to wash in the hottest water available as this will open the fibers and release debris and grease caught deep within the fibers.
• You may want to occasionally deep clean your microfiber by boiling it on the stove for 10 minutes.
• To dry, hanging the mop in direct sunlight also helps sanitize them using the sun’s ultra violet rays or dry them in a hot clothes dryer without any lint (fluffy) garments or towels.
• To remove stubborn stains, boil for 10 minutes to allow the fibers to swell and release any debris or spray the stain with the Norwex Carpet Stain Buster and allow to soak for 10 minutes before laundering.
• DO NOT USE bleach, abrasive solutions, fabric softener or dryer softener sheets, these destroy the products ability to clean. DO NOT iron. DO NOT USE with paints or inks.